Handpiece Bearing Maintenance

Email :

Handpiece Bearing Maintenance


bearings Bearing >Dental Bearings > Handpiece Bearing Maintenance

Handpiece Bearing Maintenance

Handpiece Bearing Maintenance - PYC
Handpiece Bearing Maintenance

1.Clean external surfaces of handpiece.

2.Insert bur into chuck.

3.Clean handpiece internally as follows.

  a.Spray handpiece cleaner or cleaner/lubricant into drive air turbine for 1 to 2 seconds.

  b.Operate handpiece within a paper towel or other cover to purge used lubricant and debris.

  c.Repeat the spray/operation procedure until expelled fluid is absolutely clear.

  d.Wipe external surfaces to remove expelled fluid. 

  e.Operate handpiece for 3-5 seconds, repeating until all fluid has been expelled.

4.Sterilize handpiece according to manufacturer's instruction.

5.Cool handpiece to room temperature.

6.Apply two drops of lubricant into drive air tube.

7.Operate handpiece for 5 to 10 seconds within paper towel or other cover to purge excess lubricant.

8.Wipe external surfaces.

9.Handpiece is ready for use.

rotex 780 handpiece bearingsdental tool bearingsceramic dental bearingsdental high speed bearingssmooth dental bearingsminiature dental bearingsdental drill bearingbearing dentalbearing dental tools manufacturer7x4x2 dental bearingsdental bearing suppliers


Request a Quote

All fields are required.

Contact Us:

ADD : Room 2207,No.1065( A)
           Zhao Jia Bang road,
TEL : 0086-21-64692915
FAX : 0086-21-51062733
E-mail :

Copyright 2000-2012 PYC BEARING CO.,LTD.